Sigenergy Smart Home Battery

Sigenergy Home

Sigenergy Home is the world’s first AI-optimized, fully integrated 5-in-One home energy management system that empowers home owners to use solar energy to achieve energy independence with maximum efficiency, savings, flexibility and resilience.

Get Your Free Energy Assessment

Integrated
Design

Unrivalled
Safety

Energy
Independence

Max
Savings

Expandable on demand

The unique modular and stackable design of Sigenergy Home allows for expansion of your system at any time.

With 5 and 8 kWh battery packs, flexible capacity combinations can be created to suit your needs at different stages of your independent home energy journey.

1–5

Batteries per stack

10 (max)

Stacks in
parallel

5-390 kWh

Capacity range
per system

Tough by design

Peace of mind.

280 Ah large capacity battery cells, long lifespan
5 major safety strategies in each battery pack
Multi-source black start capability, uninterrupted power
NEMA 4X enclosure type, install anywhere

5 major

Battery safety
strategies

32.85 V

Low voltage
architecture

0 ms

Load-side
disruption

NEMA 4X

Enclosure
type

Effortlessly efficient

Self-guiding pin connectors between modules automatically connect once stacked, avoiding the need for field wiring and saving installation cost.

As a DC-coupled system, Sigenergy Home enjoys higher efficiency. DC-DC Optimizers in each battery pack and parallel pack-connections drive better long-term performance by avoiding battery mismatch.

Plug & Stack

5 min

Quick commissioning

2 min

Software upgrade

1 click

Full system scan

AI Optimized

Future proof.

Experience AI-assisted support, monitor deployed systems and perform remote diagnostics all via our Sigenergy App. System owners will enjoy AI-assisted energy planning, safety features and grid-services.

Sigenergy Home is smart enough to learn patterns and self-evolve over time in order to provide the safest, most beneficial home energy experience.

AI assisted

Energy Planning

AI assisted

Grid Services

AI assisted

Safety Protection

AI assisted

Customer Support

4 Layer System Protection

PV disconnection protection

DC ground-fault protection

Grid fault protection

DC bus protection

5 Layer Battery Protection

Two-way EV Charging

Pioneering V2X

With the Sigenergy Home DC-coupled charging module, you can harness the power of the sun and directly charge your EV with clean solar energy.

Additionally, its bi-directional capability allows you to tap into the power of your EV to backup your home during a power outage.

* V2X functionality is limited by the EV’s capabilities. Once the relevant standards are published, V2X feature can be upgraded through the OTA. For the official support of vehicle models and support timelines, please refer to future announcement made on the official website.

Slide 1

Sigenergy Home

Energy Controller

• EMS inside for precise control

• DC ground-fault protection

• Multi-source black start

• On & off-grid compatibility

• Maximum 4 MPPT with 200% PV input oversizing

• NEMA 4X system enclosure

• NEC rapid shutdown compliant

• Seamless switching experience

• AFCI function integrated

Slide 1

Sigenergy Home

Energy Controller

DC Input (from PV)
MPPT voltage range(V) ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ 50~550
No. of MPP. trackers‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ 2~4
No. of PV strings per MPPT ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎1
Max. input current per MPPT ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎16 A

AC Output (on-grid)
Nominal output power(W)‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎3840~11400
Nominal output voltage(V) ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎240/120

Efficiency
Max. efficiency ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎98.0%

Battery Connection
Supported battery module‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎‎ PG BatteryPack 5.0 / 8.0

General
Cooling ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎Smart air cooling
System enclosure type ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎NEMA 4X

Slide 1

Sigenergy Home

V2X Module

• V2H (vehicle-to-home) power supply, ample backup energy

• V2G (vehicle-to-grid) power transfer, ready for energy trading

• EV-supported home energy system black start

• Max. 25 kW stable bi-directional charging

• 150 V ~ 1000 V charging, wide EV compatibility

• Charge EV with 100% solar power

• Track & schedule charging on myPointGuard App

• NEMA 4X system enclosure

Slide 1

Sigenergy Home

V2X Module

DC Output
Max. charging power(kW) ‎ ‎ ‎ ‎‎ ‎ 12.5 | 25
Output voltage range(V) ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎150~500, 150~1000

Function
Authentication‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎RFID card / Auto. charging (no authentication)

General
User interface ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎‎‎LED indicator, App, RFID / NFC reader
Remote function ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎OTA, Remote diagnosis

Slide 1

Sigenergy Home

Battery Pack

Performance Specs
Battery type ‎ ‎ ‎ ‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎LiFePO4
Total energy capacity (kWh) ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎ ‎ ‎ ‎ 5.38 / 8.06
Usable energy capacity (kWh) ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ 5.2 / 7.8
Max. charge/discharge power (W) ‎ ‎ ‎2850 / 4350

General
Cooling ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎‎‎ Natural convection
System enclosure type ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎NEMA 4X
Installation method ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎Floor standing / Wall-mounted

Related Products

Sigenergy V2X Module

Sigenergy LoadHub

Sigenergy EV AC Charger